Accessories & Other Parts

 

Springer Precision XD/XDM HD Extractor 9mm/.40

Springer Precision  XD/XDM HD Extractor 9mm/.40

This Springer Precision HD Extractor was designed to improve the ejection reliability.

Springer Precision XD/XDM HD Extended Ejector

Springer Precision  XD/XDM HD Extended Ejector

This Springer Precision HD extended ejector was designed to improve the ejection and durablity over the factory part. Machined from high quality 17-4 stainless steel and heat treated for years of durabilty, we have precision machined this part to...

SP XD/XDM Extended Magazine Release - Production/ESP

SP XD/XDM Extended Magazine Release - Production/ESP

These releases are made from stainless steel and match the factory profile per rule 21.6 in the USPSA rulebook.

Springer Precision EZ slide racker XD/XDM - carry/duty

Springer Precision EZ slide racker XD/XDM - carry/duty

Springer Precision designed this slide racker for the XD-XDm, and it replaces your striker retaining plate - CARRY/DUTY version

 

 

Springer Precision EZ slide racker XD/XDM - competition

Springer Precision EZ slide racker XD/XDM - competition

Springer Precision designed this slide racker for the XD-XDm, and it replaces your striker retaining plate - COMPETITION version

Springer Precision EZ slide racker XD/M- competition Right Side

Springer Precision EZ slide racker XD/M- competition Right Side

Springer Precision designed this slide racker for the XD-XDm, and it replaces your striker retaining plate - COMPETITION this version extends on the right side.

Springer Precision "EZ Grip" Safety XD (9 or 40) or XDm

Springer Precision "EZ Grip" Safety  XD (9 or 40) or XDm

This grip safety is made of stainless steel and available in a black or silver color.  Does work with Mod 2 SC, does not work with XD45.

Springer Precision Colored Striker Retaining Plate

Springer Precision Colored Striker Retaining Plate

Add some color to your XD/XDM with a red, silver, or blue striker retaing plate, made from aluminum.  .05oz

Springer Precision Aluminum Cocked Indicator Guide

Springer Precision Aluminum Cocked Indicator Guide

This aluminum cocked indicator guide is a replacement for the factory plastic part.  .025oz

Springer Precision Slide Stop

Springer Precision Slide Stop

The Springer Precision slide stop was designed to position the slide release lever so that it does not interfere with your shooting grip and will engage the slide when the magazine is empty.

PistolGear Slide Stop

PistolGear Slide Stop

The PistolGear slide stop allows any XD/M owner, even those who lack dexterity in their thumb or those who have trouble hitting the slide stop because of small hands, to quickly and easily close the slide from the lock-back position.

PistolGear XDM .45 Slide Stop

PistolGear XDM .45 Slide Stop

The PistolGear slide stop allows any XDM .45 owner, even those who lack dexterity in their thumb or those who have trouble hitting the slide stop because of small hands, to quickly and easily close the slide from the lock-back position.

.050 Hex Driver

.050 Hex Driver

These .050 Bondhus hex drivers are ideal for Springer Precision extra capacity basepads.

Pin, Striker Retaining

Pin, Striker Retaining

Striker Retaining Pin for the XD/XDm.   4 per pack

Pin Punch Set for the XD/XDm

Pin Punch Set for the XD/XDm

This set includes a 1/16", 3/32" and 5/32" pin punch; #5 roll pin starter punch; #3 roll pin punch; and 2 replacement roll pins. These are all of the punches needed for maintenance of the XD or XDm.

Roll Pin Starter Punch XD/XDM

Roll Pin Starter Punch XD/XDM

This is the roll pin starter punch XD/XDM used for holding and starting the striker retaining roll pin. Precision ground from specially selected tool steel, hardened and finished.

Pin Punch - #3 Roll Pin

Pin Punch - #3 Roll Pin

This is the punch used for removing the striker retaining pin. These patented punches are the only way to remove and re-use roll or spring pins without causing glaring damage to the pins.

Pin Punch - 5/32"

Pin Punch - 5/32"

This is the punch used for removing the pins for the locking block. Precision ground from specially selected tool steel, hardened and beautifully finished.

Pin Punch - 1/16"

Pin Punch - 1/16"

This is the punch used for removing the pins for the loaded chamber indicator and magazine release. Precision ground from specially selected tool steel, hardened and beautifully finished.

Pin Punch - 3/32"

Pin Punch - 3/32"

This is the punch used for removing the pins for the grip safety and sear. Precision ground from specially selected tool steel, hardened and beautifully finished.